Additional Information
| Product Code | WLS004 |
|---|
The Wireless Smoke Detector is a photoelectric smoke detector for adding fire warning capability to intruder alarm systems. This smoke detector is designed for use in a single residential home only. When sufficient smoke is detected, the detector will sound its alarm and the transmitter will send an alarm message to the control panel. If this is used with our Agility control panel then a text or voice message will also be sent to you even if the Control panel is not set. This smoke detector is easy to install and the included 9v Lithium battery lasts several years.
• Frequency of 868MHz
• Range up to 300m (1000ft) line of sight
• Ceiling mount
• No radiation emission
• Restore transmission
• Test mode
• Low battery transmission
• Uses one of 16 million codes without dip switches
• Status transmission every 15/65 minutes
• Cover and back tampers
• Uses a 9 volt lithium or alkaline battery
This item is for use with the range of Risco Agility Alarm Kits. For more information on ordering an alarm panel installed please call 0845 519 5225
• Frequency of 868MHz
• Range up to 300m (1000ft) line of sight
• Ceiling mount
• No radiation emission
• Restore transmission
• Test mode
• Low battery transmission
• Uses one of 16 million codes without dip switches
• Status transmission every 15/65 minutes
• Cover and back tampers
• Uses a 9 volt lithium or alkaline battery
This item is for use with the range of Risco Agility Alarm Kits. For more information on ordering an alarm panel installed please call 0845 519 5225